How to modify the Spline
To modify the Spline
Step 1
To modify the Spline, the first thing you must Use the mouse opens the Modify menu and then click the Spline command.
Step 2
After that, select the spline and finally, enter an option Fit data/Close/Move vertex/Refine/rEverse/Undo] move.
Edited By: Norasyikin Mahmud
© 2001 ISC
All rights reserved. All other product names and trademarks are registered properties of their respective owners.
021101
To modify the Polyline
Step 1
To modify the Polyline, first, you need to use the mouse to open the Modify menu. And then click the Object sub menu. Next, just click the Polyline command.
Step 2
Later, select the Polyline in the page.
Step 3
Enter an option [Open/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype gen/Undo]
To work with Hatch
Step 1
To work with Hatch, first, you need to use the mouse to open the Draw menu and then click the Hatch command.
Step 2
After that, just click the Select Objects button and then select the object that you want to add the pattern.
Step 3
Later, select the pattern in the Swatch list box. When you have finished the selection, click the Ok button.
Step 4
Finally, you will see that the pattern has been added in the rectangle.
To work with Fillet
Step 1
If you wish to work with Fillet, the first thing you need to do is to use the mouse to open the Modify menu and then click the Fillet command.
Step 2
Next, select the object and then press the Enter key.
Before
After
To work with Chamfer
Step 1
If you would like to work with Chamfer, the first thing you need to do is to use the mouse to open the Modify menu and then click the Chamfer command.
Step 2
Next, select the object and then press the Enter key.
Before
After
To work with Break
Step 1
To work with Break, the first thing you need to do is to use the mouse to open the Modify menu and then click the Break command.
Step 2
After that, you need to select the object and then press the Enter key.
Step 3
Later, you have to specify the second break point.
To work with Stretch
Step 1
To work with Stretch, the first thing you need to do is to use the mouse to open the Modify menu and then click the Trim command.
Step 2
Next, just select the object and then press the Enter key.
Step 3
Finally, select the object to trim or shift-select to extend. You need to remember that the Curve must intersect cutting edges at least twice.
To work with Scale
Step 1
If you would like to work with Scale, the first thing you need to do is to use the mouse to open the Modify menu and then click the Scale command.
Step 2
Next, select the object and then press the Enter key.
Step 3
After that, specify the base point and the scale factor or Reference.
To rotate the object
Step 1
To rotate the object, the first thing you have to do is to use the mouse to open the Modify menu and then click the Rotate command.
Step 2
After that, you have to select the object that you want to rotate and then press the Enter key.
Step 3
Now, specify the base point and specify the rotation angle or Reference and finally, press the Enter key.
To move the object
Step 1
To move the object, the first thing you need to do is to use the mouse to open the Modify menu and then click the Move command.
Step 2
Now, you need to select the object that you want to move and then press the Enter key.
Step 3
After that, specify the base point or displacement and finally, specify the second point of displacement or use first point as displacement.
To work with Mirror command
Step 1
To work with Mirror command, first you need to use the mouse to open the Modify menu and then click the Erase command.
Step 2
Next, select the object and then press the Enter key.
Step 3
Now, you have to specify the first point of mirror line and then specify the second point of mirror line. Finally, it will ask you whether you would like to delete the source objects.
To work with Copy command
Step 1
To work with Copy command, first, you need to use the mouse to open the Modify menu and then click the Erase command.
Step 2
Next, you need to use the mouse to select the object that you want to copy and then press the Enter key.
Step 3
Finally, specify the base point or displacement and specify the second point of displacement.
To work with Erase command
Step 1
To work with Erase command, the first thing you need to do is to use the mouse to open the Modify menu and then click the Erase command.
Step 2
Next, you need to select the object that you want to delete.
Step 3
Now, you will see that the selected object has been deleted.
To change the line color
Step 1
If you wish to change the line color, first, you must use the mouse to open the Format menu and then click the Color command.
Step 2
Next, you need to select the color that you want and then click Ok button.
Step 3
Now, you can try to draw the object and you will see that the line color has changed.
To draw the center mark
Step 1
To draw the center mark, the first thing you need to do is to use the mouse to open the Dimension menu and then click the Center Mark command.
Step 2
Next, place the insertion point to where you want to insert it.
Step 3
Finally, select the arc or circle.
How to draw the Continue
To draw the Continue
Step 1
To draw the Continue, first, you need to use the mouse to open the Dimension menu and then click the Continue command.
Step 2
Later, place the insertion point to where you want to insert it.
Step 3
Finally, just specify a second extension line origin.
To draw the Baseline
Step 1
To draw the Baseline, first you need to use the mouse to open the Dimension menu and then click the Baseline command.
Step 2
Next, you have to place the insertion point to where you want to insert it.
Step 3
Finally, just specify a second extension line origin.
